GRO Gasoline Range Organic Hydrocarbons

UVF-Trilogy analyzer includes GRO UV module and arrives factory calibrated using Sitelab's GRO CAL-025M and CAL-025H calibration kits. Detects BTEX and other volatile petroleum hydrocarbons in the C6 to C10 carbon range. Use for soil or water analysis.

● Results compare well to EPA Method 8015, VPH methods and other laboratory TPH-GRO Gas Chromatography test methods.

● Ideal for gasolines, jet fuels, heating oils, diesel and other light-refined petroleum contaminants. Approved for Underground Storage Tank (UST) sites by NC DEQ.

● Analyzer features an intuitive touch screen interface and can store up to 18 calibrations in memory.

● The equipment is easy to operate. Use in the field or in the lab. Glass cuvette, solvent dispenser bottle and other tools needed are included. See parts list for details.

● Calibration kits and sample test kits sold separately.

See GRO: PERFORMANCE DATA

TPH as GRO plus EDRO: PERFORMANCE DATA

Click images below to enlarge:

TEST FOR GRO USING SAMPLE TEST KITS:

Soil, water and other samples are extracted in solvent using disposable test kits and measured for gasoline range organic hydrocarbons. Click below for details:

See UVF-Trilogy test procedures used for analysis:

UVF-TRILOGY GRO CALIBRATION KITS:

Part No. CAL-025M ● In Methanol for Soil Analysis
Part No. CAL-025H ● In Hexane for Water Analysis

These products contain 5 standards used to check factory calibrations or to recalibrate analyzer, if necessary. Minimum detection limit = 0.5 ppm.

See UVF-Trilogy calibration kits for details: